Andrew's passive components meet many application requirements. They are
ideal as standalone equipment for completely passive indoor networks driven
by a base station or RF coverage and complement our ION™ Series Distributed
Antenna Systems. more...
A.I.M.O.S. - Andrew Integrated Management and Operating System - is the network
management solution for all Andrew repeater and distributed antenna systems.
more...
Andrew leads the industry with the design and supply of cost effective tunnel
solutions worldwide and offers several systems for inside tunnel coverage that
include the ION™ Fiber Distributed Antenna System, Node repeaters, and ACB cable
boosters. Andrew products support all technologies, including but not limited
to analog, Tetra, Tetrapol, TDMA, iDEN, IS-95, CDMA2000, GSM, GPRS, EDGE, and
UMTS. All can be integrated into the Andrew A.I.M.O.S. Network Management Solution.
more...
The MIR-T series repeaters are designed for 19” rack mounting. Each frequency
band (GSM-R, (E)GSM900, GSM1800, UMTS) fits into one 19” chassis of 1 HU which
can be combined externally. Tunable band selective conversion modules also provide
a high degree of flexibility. more...
The Cable Booster (ACB) is a bi-directional, multi-carrier amplifier used
to compensate for RF loss in passive Distributed Antenna Systems (DAS). more...
The MRx18 miniRepeater is a very small sized and cost-effective bi-directional
indoor amplifier used to enhance signals between a mobile and a base station.
For medium sized areas such as offices, shops and basements the MRx18 miniRepeater
is the ideal solution. more...
The digital multi-band Node A RF Enhancer with its multi sub-band frequency
selection in combination with a passive distribution system enables high quality
voice and high speed data service in larger buildings where it was previously
not available.
Node X Series repeaters for outdoor application enable high quality voice
and high speed data service in areas where it was previously not available.
Furthermore the digital Node X repeater removes antenna-to-antenna isolation
problems through its ICE (Interference Cancellation Equipment) feature which
is mandatory to achieve high output power when donor and coverage antenna(s)
are close to each other. Additionally the Node X rates QoS measurement statistics,
and exacts setups through an integrated measurement receiver (signal decoder).
more...
ION™-M Series is a flexible Radio-over-Fiber (RoF) platform for all conceivable
optical distribution scenarios, which guarantees the best coverage with the
lowest interference. Cutting-edge technology fuels the ION™-M’s high-power,
robust design making it suitable for both indoor and outdoor applications. more...
ION™-B Series is a Radio-over-Fiber (RoF) distributed antenna system which
meets all distribution needs from the simplest to the most complex indoor applications.
It is capable of transporting frequencies from 800 to 2700 MHz, from traditional
cellular to Wi-Fi signals, regardless of protocol or modulation. more...
Andrew's Geometrix mobile location system bridges the gap between location-enhanced services and the location technologies that enable them by providing the capability to implement any or all wireless locating techniques. Geometrix supports handset-based, network-based, and hybrid locating technologies on a common platform.
Andrew’s OneBase Insite™ Remote Cell Site Control and Monitoring Solution
delivers network performance information that greatly improves the quality of
service to mobile operators and users worldwide.
Comsearch, a CommScope company, provides spectrum management services and related software and data solutions to mobile, microwave, broadband, and satellite operators.
Andrew's Invex3G® wireless network drive test system supports all major CMRS mobile wireless technologies including 2G, 2.5G, 3G - HSDPA in January 2006. Invex3G analysis provides critical quality-of-service measurements including failed originations, dropped calls, and call quality.
Omnix™ is a workflow and infrastructure management system specifically
designed for mobile network operators. It provides process and change
management automation using project-based workflows that track every
step in the project lifecycle.
Andrew’s OneBase Insite™ Remote Cell Site Control and Monitoring Solution delivers network
performance information that greatly improves the quality of service to mobile
operators and users worldwide.
These products, along with Andrew filters, combine, transmit and receive
signals to a common port, provide the necessary rejection between the receiver
and transmitter, and eliminate spurious out-of-band rejection.
For wireless RF base station/feeder network applications, Andrew offers custom
manufactured filters, diplexers, and combiners. These products combine transmit
and receive signals to a common port, provide the necessary rejection between
the receiver and transmitter, and eliminate spurious out-of-band rejection.
Andrew has developed two integrated product offerings: an integrated radio and
amplifier and an integrated radio, amplifier, and receiver. Both of these
products were developed to meet the low-cost demands of 3G deployments.
A complete BTS in a box! The Andrew OneBase Pico Node B is designed to
complement an OEM's existing BTS product range, allowing a Pico BTS offering to
be included in a product portfolio, without diverting internal development
resources. Time to market is shortened considerably and both risk and cost are
reduced. The case-style can be customized to suit an OEM's corporate "look."
Andrew offers the industry's widest range of RF amplifiers for use in wireless
RF communications systems. Andrew designs, manufactures, and distributes the
telecommunications industry's largest portfolio of single-carrier and
multi-carrier RF power amplifiers for use in Cellular, PCS/DCS, CDMA, W/CDMA,
and 3G systems.
Andrew Tower Mounted Amplifiers (TMA series amplifiers) are low noise amplifiers
that are mounted at the top of the base station tower in close proximity to the
base station antenna. These products increase sensitivity of the reverse link to
improve reception of weak signals.
The signal processing contained within the transceiver unit improves the
effective performance of the filtering elements. The RF transceiver provides
integrated high-linearity, high efficiency RF power amplification, and diversity
reception.
Andrew manufactures a full line of terrestrial microwave antennas for
applications such as fixed-line telecommunications networks, broadband wireless,
wireless infrastructure, and television broadcasting. ValuLine® antennas provide
a cost-effective solution for all terrestrial microwave systems operating at
frequencies between 7 GHz and 60 GHz.
Introducing HELIAX 2.0 from Andrew, the
worlds only complete family of RF transmission line cable that offers AVA copper and FXL aluminum technologies, plus a single series of EZfit® connectors and accessories that brings it all together.
Only HELIAX 2.0 lets you deploy the technology that is right for your specific network or site. It is a complete family of 50 ohm transmission line cables featuring HELIAX AVA copper and HELIAX FXL aluminum, the leading products in their respective classes.
Peace of mind, profitability, and Performance With HELIAX 2.0, you can have
it all.
Cell Reach 50-ohm coaxial wireless transmission line cables feature
a smooth-wall, semi flexible copper outer conductor that provides superior performance,
low loss, high reliability and ease of connectorization. Cell Reach is
ideal for monopole, self-supporting tower, conduit, rooftop and indoor applications.
Cable assemblies are used to connect the main feeder cable line to the antenna.
Andrew provides a full range of products suitable for in-cabinet applications
and a wide range of traditional cable assemblies utilizing solid copper, braid,
semi-rigid and conformable cables, as well as some technically unique cables for
special applications.
Andrew offers Base Station Antennas for professional communications systems.
Recognized around the world as the most technically advanced professional base
station antenna solutions, Base Station Antennas incorporate multiple
value-added features that have made them the preferred products of system
managers, designers, and engineers around the globe.
Andrew Cinta™ Cables cover the entire Radio Frequency (RF) footprint for
applications that connect the world: mobile phones, in-building, E911,
unlicensed band, mobile antennas, satellite antennas, terrestrial microwave,
WiMAX, broadband, medical, military, and air traffic control.
CommScope's Wireless Broadband Communication cable (WBC) is a low
loss, low cost and highly flexible 50 ohm braided coax cable and the clear cable-of-choice
for challenging installations requiring a tight bend radius. The WBC is well
suited for antenna feeds over short distances, wireless jumper assemblies, replacement
of aging and less effective systems, or complex installations where flexibility
is required. Applications include Land Mobile Radio(LMR),Local MultiPoint Distribution
System(LMDS),Multi-Channel Multi-Point Distribution Service(MMDS),Wireless Local
Loop(WILL),Personal Communication System(PCS), Mobile, In-building and Fixed
Wireless networks.
Andrew offers the industry's most comprehensive line of antennas for
point-to-point and point-to-multi-point microwave communication. The extremely
wide range of antenna permutations permits the designer to choose an antenna
that is optimized to the specific system requirements.
EZFit® Series of connectors provide secure, water-tight connections
to 50 Ohm transmission line cables, whether smoothwall or corrugated, copper
or aluminum. Compared to the majority of connectors in use today, the new EZfit
Series connectors and tools are lighter in weight, more corrosion resistant
and more compact in design for easier handling during installation. Installers
can reduce inventory and spare parts as a result of the EZfit Series’ cross
compatibility and design flexibility.
Andrew HELIAX® standard connectors are designed for
fast, accurate installation and to ensure low IMD, low VSWR, and
system integrity in the harshest of outdoor environments.
OnePiece™ family of connectors save time and money. System
engineers, installers, and purchasing personnel all benefit from
the advanced design of OnePiece connectors. The captivated, preset
inner contact pin and patented clamping mechanism provide lower
IM and attenuation and exceptional mechanical reliability. One-step
installation is faster, easier, and more precise. OnePiece connectors
are priced lower than most standard connectors.
Fast-fitting RingFlare™ connectors are available in a variety
of interface types for a large selection of HELIAX® LDF series
cables. The RingFlare connector is a simple, two-piece threaded
connector with a captivated one-piece inner contact pin, factory
set to the correct depth. RingFlare connectors are completely weatherproof
and field proven. With fewer components and attachment procedures,
the RingFlare also offers fast installation. 7-16 DIN male, 7-16
DIN female, N-male, and N-female connectors are available for most
HELIAX LDF style cables.
Ease connector attachment issues and ensure excellent RF transmission
line performance with Positive Stop™ connectors from Andrew Wireless
Solutions. Revolutionary Positive Stop connectors for HELIAX®
corrugated coaxial cables require no special tools or torque wrenches,
eliminating both guesswork and time consuming measurements.
Using standard wrenches and in less than one rotation, Positive
Stop connectors give the installer a clear visual and mechanical
verification of a correct fit, sealing out water and sealing in
excellent electrical performance. The connectors’ easy verification
eliminates the need to control torque levels and provides consistent
attachment integrity and electrical performance.
Hollow transmission lines used to connect antennas and radios.
Andrew manufactures circular, rectangular, and elliptical waveguides for various
uses such as television broadcasting and microwave transmission.
Wireless cabinet enclosures optimize heat transfer, environmental protection,
and ease of installation and maintenance. Each cabinet is assembled, completely
wired, and system tested at the factory to provide the highest standards of
quality and quick, trouble-free installation.
Andrew's global network of distribution partners provides superior, localized
material supply to substantially reduce your shipping costs as well as reduce or
eliminate any transit delays or shipping damage.
Reliable Andrew cable installation accessories and lightning protection help
keep your system operational, lowering repair and replacement costs. We lead by
design, innovation, and extensive testing. Andrew product performance is the
industry standard.
Andrew pressurization equipment applies positive pressure on transmission lines
to minimize corrosion caused by moisture and eliminate voltage breakdown
(arcing). A constant supply of dry air under pressure assures high signal
quality, low VSWR, and reduced risk of component damage from moisture
accumulation.
The Andrew Teletilt® antenna control system allows network optimization that
improves coverage, lowers costs, increases revenue, and increases customer
satisfaction with better call quality. Now service providers can make antenna
adjustments remotely in just minutes - without site downtime or costly tower
crews.
Andrew Systems Inc. provides program management and field installation services
of the same level of quality and reliability that customers have come to expect
from Andrew products.
Andrew Steel Products is a part of our one-stop, end-to-end RF subsystems
supplier portfolio. These antenna mounting and site components are backed by our
commitment to excellence.
Andrew Solutions
Corporate
Andrew
HFC/Broadband
SYSTIMAX
Uniprise
Passive Components
ION™-M Fiber Distributed Antenna System
ION™-B Fiber Distributed Antenna System
Mobile Location Solutions
Spectrum Management
Test and Measurement
Workflow Planning and Management Systems
Diplexers / Duplexers
Filters
Integrated Products
OneBase Pico Node B
RF Power Amplifiers
Tower Mounted Amplifiers
Transceivers
Terrestrial Microwave Antennas
HELIAX® 2.0 Coaxial Cables
Cell Reach® Coaxial Cable
Cable Assemblies
Base Station Antennas
Braided Cable
Broadband WiMAX Antennas
HELIAX® Coaxial Cable
Connectors
Waveguide
Wireless Cabinets
Distribution
Installation Accessories and Services
Pressurization
RET Antenna Controllers
Services
Steel / Mounting Products