Home > Products > Subscriber Drop Products > Subscriber Amplifiers
Share |
Subscriber Amplifiers

Drop Actives
CommScope’s advancement in amplifier design achieves industry leading performance that delivers products with low noise, low distortion, excellent return loss, superior RFI shielding and exceptional weatherability. Our line of subscriber amplifiers are manufactured with an aluminum die-cast housing with both plated or baked enamel finish, which is water sealed to 15 psi, RFI shielded to 100 dB and incorporates flat end brass ‘F’ ports. Our amplifiers are manufactured with SMT technology and are 6 kV surge protected. Forward only, reverse only, two-way active, VoIP passive bypass, MoCA models available with single or multiple outputs.

  • Many amplifiers available in space saving, nano mini and all-ports-down versions.
  • Models available with passive bypass to provide uninterrupted operation of critical VoIP telephony service.
  • Dual surge protection, 6 kV combo wave and spark gap on input and 6 kV ring wave on outputs.
  • Unique positive tilt compensates for greater attenuation at higher frequencies.
  • Patented four-sided, diamond shaped contact maximizes long term contact with center conductor surface.
  • Noise cancelling circuitry available on multiple output models.
  • Aluminum housing with plated or baked enamel finish.
  • Neoprene moisture and mesh RFI gaskets on baked enamel finish only

Related Support & Documentation
 
Blog | Contact Us | Careers | My CommScope | Support | Terms of Service
CommScope
FEEDBACK