CommScope ::: Andrew ::: Product/Network Solutions/Invex3G® Wireless Measurement Solutions

Invex3G® Wireless Measurement Solutions

Andrew's Invex3G wireless network drive test system supports all major mobile wireless technologies including 2G, 2.5G, and 3G. Invex3G allows wireless network operators to view their service from the perspective of the subscriber. Invex3G analysis provides critical quality-of-service (Qos) measurements including failed originations, abnormal ends, call setup time, and call quality. Invex3G provides the objective means for network operators to assess and improve service levels and utilization of key resources.

Invex3G ILF log files are supported by leading post-processing applications such as Actix Analyzer, Xceed Technologies' WindCatcher, and Qualitest's Gladiator. Andrew's Score produces benchmark performance reports for packet data and MOS (Mean Opinion Score) audio quality testing using input from compact summary files generated by Invex3G.

Andrew's Invex3G offers features that can provide any wireless carrier with the Qos test and measurement capabilities required to operate effectively.
These features include:

Benchmark, optimization, and network planning support for all major wireless technologies including HSDPA, HSUPA, WCDMA, EDGE, GPRS, GSM, EV-DO Rev A, CDMA2000®1X, iDEN, and IS-136.
Voice Quality (MOS) and packet data measurement solutions for all wireless technologies that allow carriers to objectively gauge Qos levels against their competitors'.
Post-processing support for analysis of Invex3G data files for common network problems and benchmark results.
Voice Quality (MOS) testing with either PESQ 862.1 or Squad-LQ.

The Current Invex3G® Release

The Current Invex3G^® Release: 4.10 New Devices in Version 4.10 CDMA2000 1X Handsets Kyocera K312 The Kyocera K312 CD...

The Current Invex3G® Release: 4.10

New Devices in Version 4.10

CDMA2000 1X Handsets

Kyocera K312

The Kyocera K312 CDMA 1X handset operates in the 1900 MHz and 800 MHz bands and is supported by the Invex3G chassis and Invex3G-PC. Invex3G Data/Voice cables and an Isolation module are available for the handset. Customers must modify the phone to attach an RF cable for use with the Isolation module. An Invex3G CDMA license is required .
Sanyo SCP-7050

The Sanyo SCP-7050 CDMA 1X handset operates in the 1900 MHz and 800 MHz bands and is supported by the Invex3G chassis and Invex3G-PC. Invex3G Data/Voice and ASR cables and an Isolation module are available for the handset. An Invex3G CDMA license is required.

EV-DO Handsets and Air Cards

LG AX8600

The LG AX8600 EV-DO handset operates in the 1900 MHz and 800 MHz bands and is supported by the Invex3G chassis and Invex3G-PC. Invex3G Data/Voice cables and an Isolation module are available for the handset. Customers must modify the phone to attach an RF cable for use with the Isolation module. An Invex3G EV-DO license is required..
LG VX8350

The LG VX8350 EV-DO handset operates in the 1900 MHz and 800 MHz bands and is supported by the Invex3G chassis and Invex3G-PC. Invex3G Data/Voice cables and an Isolation module are available for the handset. Customers must modify the phone to attach an RF cable for use with the Isolation module. An Invex3G EV-DO license is required .

LG UX565

The LG UX565 EV-DO handset operates in the 1900 MHz and 800 MHz bands and is supported by the Invex3G chassis and Invex3G-PC. Invex3G Data/Voice cables and an Isolation module are available for the handset. Customers must modify the phone to attach an RF cable for use with the Isolation module. An Invex3G EV-DO license is required.

Huawei EC360 Air Card

The Huawei EC360 EV-DO Rev A air card operates in the 1900 MHz and 800 MHz bands and is supported by the Invex3G chassis and Invex3G-PC. An Isolation module is available for the air card. An Invex3G EV-DO Rev A license is required.

Sanyo PRO200

The Sanyo PRO200 is an EV-DO Rev A QChat capable handset that operates in the 1900 MHz and 800 MHz bands and is supported by the Invex3G chassis and Invex3G-PC. Invex3G Data/Voice cables are available for the handset. An Invex3G EV-DO Rev A license and a QChat license are required.

WCDMA/HSDPA/HSUPA Handsets and Air Cards

LG TU550

The LG TU550 handset is an HSDPA / WCDMA device that operates in the 850 band. It is also supports GSM and EDGE in the 900, 1800, and 1900 MHz bands. This handset is supported by the Invex3G chassis and isolation modules as well as Invex3G-PC. MMS and SMS testing capabilities are also available for this handset. An Invex3G HSDPA license is required .

Samsung SGH-A706

The Samsung SGH-A706 handset is an HSDPA / WCDMA device that operates in the 850 and 1900 MHz bands. It is also supports GSM and EDGE in the 850, 900, 1800, and 1900 MHz bands. This handset is supported by the Invex3G chassis and isolation modules as well as Invex3G-PC. MMS and SMS testing capabilities are also available for this handset. An Invex3G HSDPA license is required.

Sierra Wireless AC881 Air Card

The Sierra Wireless AC881 air card is an HSUPA / WCDMA device that operates in the 850, 1900, and 2100 bands. It is also supports GPRS and EDGE in the 850, 900, 1800, and 1900 MHz bands. The AirCard 881 is optimized for better fringe performance on North American networks. This air card is supported by the Invex3G chassis and isolation modules as well as Invex3G-PC. An Invex3G HSUPA license is required.

Sierra Wireless AC880 Air Card

The Sierra Wireless AC880 air card is an HSUPA / UMTS device that operates in the 850, 1900, and 2100 bands. It is also supports GPRS and EDGE in the 850, 900, 1800, and 1900 MHz bands. The AirCard 880 is optimized for better fringe performance in Europe and Asia. This air card is supported by the Invex3G chassis and isolation modules as well as Invex3G-PC. An Invex3G HSUPA license is required.

iDEN Handsets

Motorola i355 Handset

The Motorola i355 is an iDEN handset that operates in the iDEN 800 and 900 MHz bands. This handset is supported by the Invex3G chassis and Invex3G-PC. An iDEN license is required.

Product Enhancements Version 4.10

HSUPA Technology Support

The Sierra Wireless AC880 and AC881 HSUPA air cards are supported in this version of Invex3G.

Lines–to–Cell Map Display Enhancements

In addition to highlighting the serving cells, the Map display can now draw bold lines to the serving cell and dashed lines to the neighbor cells representing the serving and neighbor paths when paired with an associated cell site database. The distance between the data trace (representing the location of the test vehicle) and the serving cells is shown on the map legend with associated Rx Level measurements. The lines are enabled and the color and thickness of the lines to serving cells (sectors) and neighbor cells is user-defined by settings on the map properties page.

Markers

Markers are a valuable tool for entering comments while recording that can be used later to identify specific problems or events observed during the drive by the drive-test personnel. Markers can be inserted into a log file while recording by clicking on the pushpin button on the toolbar and entering descriptive text to identify the marker. When replaying the log file, these markers with the text can be viewed on the Map and Strip Chart displays. The marker text can be viewed on the State, and History displays.

In-Building Display Interpolated Data Points

The In-Building tool allows you to take measurements within a building. GPS data points are manually created by clicking on specific points on the In-Building Display representing the current location of the Invex3G measurement equipment. The display has been enhanced for version 4.10.05, to automatically generate Interpolated data points between the manually generated points.

Video Call Type for Nokia N95 Handsets (QA 3143)

The Video call type has been added to Invex3G for the N95 handset. Video calls can now be placed or answered using the Invex3G AutoCaller. To place a video call, select the Video call type and enter the standard AutoCall parameters such as number to dial and call duration. Please see the N95 setup recommendations on page 14 for video call testing.

Invex3G® Optimization Solution

Invex3G^® Optimization Solution Invex3G Optimization systems combine rugged laboratory grade hardware, powerful, intu...

Invex3G® Optimization Solution

Invex3G Optimization systems combine rugged laboratory grade hardware, powerful, intuitive software, handsets and air cards from leading manufacturers including Kyocera, Novatel, Samsung, Motorola, Nokia and Qualcomm, and high-speed digital scanning receivers to create superior drive-test solutions for wireless networks.

Invex3G Optimization systems feature robust packet data testing across GPRS, EDGE, WCDMA, HSDPA, HSUPA, CDMA 1X, EV-DO Rev 0, EV-DO Rev A, and iDEN technologies. Squad LQ and PESQ 862.1 MOS scoring is available for all voice technologies. SMS (Short Message Service) and MMS (Multimedia Messaging Service) testing is available for CDMA and GSM technologies.

Bright color-coded summary displays and audible alerts allow you to quickly identify network problems by displaying key performance indicators with user-defined thresholds. Invex3G Optimization systems produce ILF log files supported by Actix Analyzer, Xceed WindCatcher, QualiTest Gladiator, and other leading post-processing applications.

Key features

Powerful Invex3G Graphical User Interface
Simultaneous testing of multiple technologies recorded in a single log file
Data task scripting—including FTP, HTTP, Mail, and Connect tasks for air cards and data–capable handsets
MOS scoring using Squad LQ or PESQ 862.1 algorithms
Supports HSDPA, HSUPA, WCDMA, GSM, GPRS, EDGE, iDEN™, EV-DO Rev A, CDMA, CDMA2000®1X, and IS-136 technologies
Supports phones, air cards, digital receivers with Isolation modules available for air cards and phones
Supports up to eight devices simultaneously in a single chassis
Individual TCP/IP stacks for each device for accurate data testing
Rugged high-quality hardware construction

Testing Modes

AutoCall
Voice Quality Audio Source and Record/MOS
Packet Data
SMS (Short Message Service)
MMS (Multimedia Messaging Service)

AutoCall
Invex3G Optimization systems have full AutoCall functionality allowing you to enter the number to call, call duration, and call wait times for each device. Call statistics and key performance indicators are recorded into the Invex3G log file while making calls or while in idle mode. Uplink and downlink Layer 3 messages are collected in the log file and displayed real-time. AutoCall statistics include successful call starts, origination failures, setup failures, no service failures, Abnormal-ends, and average setup time. Highly accurate EV-DO, WCDMA, CDMA, and GSM digital scanners can be used in conjunction with phone devices or separately to measure network coverage.

return to top

Voice Quality Audio Source and Record/MOS
Voice Quality Audio Source and Record features the capability to send and record audio during Invex3G AutoCall operation. A series of reference audio files are sent and received between phones connected to a mobile Invex3G system and an Invex3G fixed end system. The recorded audio segments are stored with the associated time and location information into the Invex3G ILF log file. Real-time MOS (Mean Opinion Score) scoring is also available using either SQUAD LQ or PESQ (P862.1). Since the drive test audio data is logged in its most basic form as a WAV file, types of audio analysis other than MOS such as frequency shift, clipping. DC offset, and delays deviation may be available (depending on MOS algorithm used). The WAV files can also be directly exported by the Invex3G WAV Converter display for analysis by third-party audio analysis programs.

return to top

Packet Data
Invex3G Optimization systems support a large variety of air cards and handsets for HSDPA, HSUPA, EV-DO, 1X, EDGE, WCDMA, iDEN, and GPRS packet data testing. Air cards and handsets can be placed in isolation modules and connected to external antennas to provide optimum testing accuracy. Whether you’re testing uplink and downlink throughput or connect times, Invex3G already has a data task to meet your requirements. Packet data tasks include Connect, FTP Get, FTP Put, HTTP Post, HTTP Get, Mail Get, Mail Put, Ping (ICMP Echo), Raw Upload, and Raw Download.

return to top

SMS (Short Message Service)
Invex3G supports SMS testing with a task based user interface that allows you to send and receive SMS messages on a single network or across networks. Messages can be sent and received by the same phone or sent from a phone to one or more phones in numerous user-defined combinations. The primary message content is predefined to allow matching of transmitted messages to received messages as well as providing end-to-end statistics such as delivery time, SMS completion success rate, SMS completion failure rate and SMS access success rate. You can also include additional text in the message as needed.

return to top

MMS (Multimedia Messaging Service)
Invex3G supports MMS testing with a task based user interface that allows you to send and receive MMS images and text on a single network or across networks. Images and text can be sent and received by the same phone or sent from a phone to one or more phones in numerous user-defined combinations. The primary content is predefined to allow matching of transmitted text and images to received text and images as well as providing end-to-end statistics such as delivery time. You can also include additional text in the message as needed. All tasks are configured using the MMS tab of the phone's properties page accessed by right clicking on the phone in the device tree.

Invex3G® Benchmark Solution

Invex3G^® Benchmark Solution Invex3G Benchmark systems combine rugged laboratory grade hardware, powerful, intuitive ...

Invex3G® Benchmark Solution

Invex3G Benchmark systems combine rugged laboratory grade hardware, powerful, intuitive software, handsets and air cards from leading manufacturers including Kyocera, Novatel, Samsung, Motorola, Nokia and Qualcomm, and high-speed digital scanning receivers to create superior drive-test solutions for wireless networks. Benchmark systems have a high device capacity supporting as many as 16 devices in a single chassis. Service providers and measurement service companies generally use two Invex3G Benchmark systems per vehicle, one system for voice quality testing and one system for packet data testing to optimize testing efficiency and minimize costs, however, a single benchmark system is capable of simultaneous voice and data testing.

Invex3G Benchmark systems feature robust packet data testing across GPRS, EDGE, WCDMA, HSDPA, HSUPA, CDMA 1X, EV-DO Rev 0, EV-DO Rev A, and iDEN technologies. Squad LQ and PESQ (P 862.1) MOS scoring is available for all major voice technologies. SMS (Short Message Service) testing is available for CDMA and GSM technologies.

Bright color-coded summary displays allow you to quickly compare the performance of competing wireless networks by displaying key performance indicators with user-defined thresholds. Invex3G Benchmark systems produce industry standard ILF log files supported by Actix Analyzer, Xceed WindCatcher, QualiTest Gladiator, and other leading post-processing applications.

Key features

High device capacity
Powerful Invex3G Graphical User Interface
Simultaneous testing of multiple technologies recorded in a single log file
Data task scripting—including FTP, HTTP, Mail, and Connect tasks for air cards and data–capable handsets
MOS scoring using Squad LQ or PESQ 862.1 algorithms
Supports HSDPA, HSUPA, WCDMA, GSM, GPRS, EDGE, iDEN™, EV-DO Rev A, CDMA, CDMA2000®1X, and IS-136 technologies
Supports phones, air cards, digital receivers with Isolation modules available for air cards and phones
Supports up to sixteen devices simultaneously in a single chassis
Individual TCP/IP stacks for each device for accurate data testing
Rugged high-quality hardware construction

Testing Modes

AutoCall
Voice Quality Audio Source and Record/MOS
Packet Data
SMS (Short Message Service)
MMS (Multimedia Messaging Service)

AutoCall
Invex3G Benchmark systems have full AutoCall functionality allowing you to enter the number to call, call duration, and call wait times for each device. The AutoCall function can also synchronize the calls from all devices to test network capacity. Call statistics and key performance indicators are recorded into the Invex3G log file while making calls or while in idle mode. Uplink and downlink Layer 3 messages are collected in the log file and displayed real-time. AutoCall statistics include successful call starts, origination failures, setup failures, no service failures, Abnormal-ends, and average setup time. Highly accurate EV-DO, WCDMA, CDMA, and GSM digital scanners can be used in conjunction with phone devices or separately to measure network coverage.

return to top

Voice Quality Audio Source and Record/MOS
Voice Quality Audio Source and Record features the capability to send and record audio during Invex3G AutoCall operation. A series of reference audio files are sent and received between phones connected to a mobile Invex3G system and an Invex3G fixed end system. The recorded audio segments are stored with the associated time and location information into the Invex3G ILF log file. Real-time MOS (Mean Opinion Score) scoring is also available using either SQUAD LQ or PESQ (P862.1) allowing easy comparison of voice quality between wireless networks or devices, Since the drive test audio data is logged in its most basic form as a WAV file, types of audio analysis other than MOS such as frequency shift, clipping. DC offset, and delays deviation may be available (depending on MOS algorithm used). The WAV files can also be directly exported by the Invex3G WAV Converter display for analysis by third-party audio analysis programs.

return to top

Packet Data
Invex3G benchmark systems support a large variety of air cards and handsets for HSDPA, HSUPA, EV-DO, 1X, EDGE, WCDMA, iDEN, and GPRS packet data testing. Air cards and handsets can be placed in isolation modules and connected to external antennas to provide optimum testing accuracy. Whether you’re testing uplink and downlink throughput or connect times, Invex3G has a data task to meet your requirements. Packet data tasks include Connect, FTP Get, FTP Put, HTTP Post, HTTP Get, Mail Get, Mail Put, Ping (ICMP Echo), Raw Upload, and Raw Download.

return to top

Invex3G® PC

Invex3G^® PC Invex3G PC is the perfect solution for a wide variety of multi-technology measurement tasks including Pa...

Invex3G® PC

Invex3G PC is the perfect solution for a wide variety of multi-technology measurement tasks including Packet Data, InBuilding, and AutoCall testing—Now with HSDPA, HSUPA, and EV-DO Rev A support.

The Invex3G-PC measurement solution provides the power and flexibility of the industry leading Invex3G Measurement System software in a PC only package. The Invex3G-PC system supports phones, air cards, digital scanners, and GPS receivers using the manufacturer’s USB cables and drivers in combination with a Windows XP PC running the Invex3G software. Users of the Invex3G-PC system have access to the full range of Invex3G displays such as data summary, bar charts, state, map, and message windows, as well as technology specific summary and scanner displays. Invex3G-PC produces standard ILF log files compatible with Interpreter™ and any other post processing applications.

Invex3G-PC solutions include one technology, three device connections, one standard and two data scripting capable. Data scripting capable connections will support both voice and data. Additional device connections or technologies may be added as an option. The notebook or tablet PC used to run the Invex3G-PC software is not included.

Key features
Inbuilding
AutoCall
Packet data

Key features

Powerful Invex3G Graphical User Interface
Simultaneous testing of multiple technologies recorded in a single log file
Data task scripting—including FTP, HTTP, Mail, and Connect tasks for air cards and data–capable handsets
Supports HSDPA, HSUPA, WCDMA, GSM, GPRS, EDGE, iDEN™, EV-DO Rev A, CDMA, and CDMA2000®1X
Supports phones, air cards, and digital receivers
Produces standard Invex3G ILF log files & workspaces supported by Interpreter and other post-processing applications
Touchscreen marking of locations on floorplan scan with InBuilding option and standard tablet PC
Supports one to three devices simultaneously—five or more with option
Ethereal® Network Protocol Analyzer support for for viewing and analysis of TCP/IP packet information

return to top

InBuilding

Invex3G PC - Inbuilding Invex3G-PC is the perfect solution for a wide variety of measurement tasks including InBuilding testing. The InBuilding display allows you to click on points on a map or a scanned floorplan to identify and record the location of the measurement. Manual GPS points are recorded in the log file each time the display is clicked. Invex3G-PC is used daily around the world to take measurements of wireless networks in train stations, subways, shopping malls, and office buildings where GPS reception is not available and portability is critical. An example of the InBuilding display in an office building is shown below.

return to top

AutoCall

Invex3G-PC has full AutoCall functionality allowing you to enter the number to call, call duration, and call wait times for each device. Call statistics and key performance indicators are recorded into the Invex3G log file while making calls or while in idle mode. Highly accurate EV-DO, CDMA, CDMA, and GSM digital scanners can be used in conjunction with phone devices or separately to measure network coverage. Connect a serial GPS receiver to provide detailed location information on the Invex3G-PC map display.

return to top

Packet Data

Invex3G PC - Packet Data Invex3G-PC supports a number of air cards and handsets for HSDPA, HSUPA, EV-DO, 1X, EDGE, CDMA, iDEN, and GPRS packet data testing. Simply load the drivers provided with the air card or handset, insert the air card or phone USB cable into the PC and configure the devices with the Invex3G application. Whether you’re testing uplink and downlink throughput or connect times, Invex3G-PC already has a data task to meet your requirements. Invex3G-PC automatically produces network data files for the Ethereal® Network Protocol Analyzer for viewing and analysis of TCP/IP packet information allowing data sessions to be analyzed and problems identified. A number of colorful displays are available to monitor as the data is collected.

return to top

Product Enhancement Request

In an effort to streamline the requests for product development and enhancements, Andrew has developed a quick and easy ...